将33500B连接到BenchVue收到错误

我尝试将33500B连接到BenchVue。
一切似乎都可以正常使用USB线，但如果我尝试使用以太网连接，我会收到以下错误：仪器最初似乎可用于建立连接。
如果我双击它或将其拖入工作区，它会开始尝试建立连接。
过了一会儿，它给出了这样的信息：“与仪器的VISA连接已经丢失。”
是否需要更改某些设置，或者我需要更新以解决此问题的驱动程序？
我正在使用BenchVue版本2.7.1505.22，检查器说这是最新的。
在Windows 8.1 64位以太网电缆连接33500B上运行到路由器，WiFi连接到PC。
谢谢你：Rick Whatson - TRIO T＆amp; M于2015年9月13日下午10:55



     以下为原文

  I have tried connecting a 33500B to BenchVue.

Everything seemed to work correctly using the USB cable, but if I try to connect using Ethernet I get the following error:

The instrument initially appears to be available to make a connection.
If I double click on it or drag it into the workspace, it starts trying to make the connection.
After a while it gives this message:  "VISA connection with instrument has been lost."

Are there some settings I need to change, or drivers I need to update to solve this?

I am using BenchVue Version 2.7.1505.22 and the checker says this is up to date.
Running on Windows 8.1 64bit
Ethernet cable connection 33500B to router, WiFi connection to PC.

Thank you

Edited by: Rick Whatson - TRIO T&M on Sep 13, 2015 10:55 PM