完善资料让更多小伙伴认识你,还能领取20积分哦, 立即完善>
有没有机会改进GPIFII设计器?这几乎是不可用的。
理想/基本特征: 1)将地址/数据采样与状态相关联的更好的时序图,目前,强制插入虚拟状态来解决关系。 2)对于共享地址/数据,请注意是否已对Adess或数据进行采样。 3)对于双向总线,显示数据方向显然是有用的。 4)更好的用户界面的缩放/ PAN的时序图-必须进入开始/结束时间是荒谬的 干杯 戴维 以上来自于百度翻译 以下为原文 Any chance of an improvement to GPIF II Designer? It is almost unusable. Desirable/essential features: 1) Better timing diagrams that associate sampling of address/data with states - at present, one is forced to insert dummy states to try to work out relationships 2) For shared address/data, note whether addess or data was sampled. 3) For bi-directional busses, showing the data direction would obviously be useful. 4) Better user interface for zoom/pan of timing diagram - having to enter start/end times is ridiculous Cheers David |
|
相关推荐
1个回答
|
|
嗨,戴维,
我不认为这个季度有更新的计划。 我注意到你的反馈,我会把这个反馈给负责更新这个工具的软件团队。 再次感谢您的反馈。 谢谢, 西克里希纳。 以上来自于百度翻译 以下为原文 Hi David, I don't think there are plans to update it in this quarter. I noted your feedback and I will take this feedback to software team which is responsible for updating this tool. Thanks for your feedback again. Thanks, sai krishna. |
|
|
|
只有小组成员才能发言,加入小组>>
707个成员聚集在这个小组
加入小组1759 浏览 1 评论
1545 浏览 1 评论
3259 浏览 1 评论
请问可以直接使用来自FX2LP固件的端点向主机FIFO写入数据吗?
1440 浏览 6 评论
1288 浏览 1 评论
PSOC6 CY8CPROTO-063-BLE,在freertos下flash模拟eeprom写入出错问题
1487浏览 1评论
2104浏览 0评论
108浏览 0评论
1779浏览 0评论
2186浏览 0评论
小黑屋| 手机版| Archiver| 电子发烧友 ( 粤ICP备14022951号 )
GMT+8, 2023-10-5 09:08 , Processed in 0.436759 second(s), Total 46, Slave 38 queries .
Powered by 电子发烧友网
© 2015 bbs.elecfans.com
关注我们的微信
下载发烧友APP
电子发烧友观察
版权所有 © 深圳华秋电子有限公司
电子发烧友 (电路图) 粤公网安备 44030402000349 号 电信与信息服务业务经营许可证:粤 B2-20160233 工商网监 湘ICP备2023018690号