ART-PI刷网络收音机程序无法显示是怎么回事

下载程序后，wifi join联网，fillzilla 用户名 密码loogg登陆传player文件。
但是重启无显示。
用msh进行屏幕测试 屏幕可以显示测试图片。

reboot
msh />reboot

/ _ \ | ___ |_ | | ___ () | ___ / _ / _ |_ |
/ /\ | |/ / | | ______ | |/ / _ | |/ /| | | || | | | | |
| _ || / | | ||| __/ | | | ___ | | | || | | | | |
| | | || |\ \ | | | | | | | |/ /\ _/ /\ _/ / | |
_| |/_| _| _/ _| || _/ _/ __/ _/
Powered by RT-Thread.
msh >[D/drv.sdram] sdram init success, mapped at 0xC0000000, size is 33554432 bytes, data width is 16
[I/I2C] I2C bus [i2c2] registered
[I/I2C] I2C bus [i2c3] registered
[D/board] System Clock information
[D/board] SYSCLK_Frequency = 400000000
[D/board] HCLK_Frequency = 200000000
[D/board] PCLK1_Frequency = 100000000
[D/board] PCLK2_Frequency = 100000000
\ | /

RT - Thread Operating System
/ | \ 4.0.3 build Jan 4 2022
2006 - 2020 Copyright by rt-thread team
lwIP-2.0.2 initialized!
[I/sal.skt] Socket Abstraction Layer initialize success.
[I/SFUD] Find a Winbond flash chip. Size is 16777216 bytes.
[I/SFUD] norflash0 flash device is initialize success.
[I/SFUD] Probe SPI flash norflash0 by SPI device spi10 success.
[D/FAL] (fal_flash_init:63) Flash device | norflash0 | addr: 0x00000000 | len: 0x01000000 | blk_size: 0x00001000 |initialized finish.
[I/FAL] ==================== FAL partition table ====================
[I/FAL] | name | flash_dev | offset | length |
[I/FAL] -------------------------------------------------------------
[I/FAL] | wifi_image | norflash0 | 0x00000000 | 0x00080000 |
[I/FAL] | bt_image | norflash0 | 0x00080000 | 0x00080000 |
[I/FAL] | download | norflash0 | 0x00100000 | 0x00200000 |
[I/FAL] | easyflash | norflash0 | 0x00300000 | 0x00100000 |
[I/FAL] | filesystem | norflash0 | 0x00400000 | 0x00c00000 |
[I/FAL] =============================================================
[I/FAL] RT-Thread Flash Abstraction Layer (V0.5.0) initialize success.
[I/touch] rt_touch init success
[I/FAL] The FAL MTD NOR device (filesystem) created successfully
[I/app.filesystem] mount to '/flash' success!
[Flash] (../packages/EasyFlash-v4.0.0/src/ef_env.c:1764) ENV start address is 0x00000000, size is 8192 bytes.
[Flash] EasyFlash V4.0.0 is initialize success.
[Flash] You can get the latest version on https://github.com/armink/EasyFlash .
[FTP] Powered by Ma Longwei
[FTP] github: https://github.com/loogg
[FTP] Email: 2544047213@qq.com
[I/OTA] RT-Thread OTA package(V0.2.3) initialize success.
[I/OTA] Verify 'wifi_image' partition(fw ver: 1.0, timestamp: 1592464902) success.
msh />[I/app.filesystem] Unmount "/sdcard"
[I/WWD] wifi initialize done. wiced version 3.3.1
[I/WLAN.dev] wlan init success
[I/WLAN.lwip] eth device init ok name:w0
[I/ftp] service launched success.
[I/WLAN.mgnt] wifi connect success ssid:Mm11
[I/WLAN.lwip] Got IP address : 192.168.28.63
event 0